HC6.2-Extended
The HC6.2-Extended hardness tester is testing HARDNESS, DIAMETER and THICKNESS of tablets.
Functionality
The clear display and buttons makes the HC6.2 easy to use, allowing you to operate the device safely even when wearing gloves and protective clothing.
Test results are printed immediatly and automatically after a test is finished.
Dimensions
252 x 195 x 205 mm
Weight
10 kg
EXT – Extension Module
The extension module allows the installation of a thickness gauge and the connection of a balance like Sartorius, Mettler or Precisa (the weight option requires a special license, see HC6.2-EXT+).
This connection can be used as well for friability testing.

Software
With the HC6.2 product manager software you can store up to 99 products externally and load them via a USB memory stick. An integrated product memory is available as an option.
Also the HC6.2-EXT can be used with the Ph21 Software.

Manage up to 99 products

Product setup
Easy calibration
The calibration of the HC6.2 is so simple, that it can performed within a couple of minutes only!

1. Operating mode

2. Slide to open

3. Load cell in vertical position

4. Place calibration plate

5. Perform calibration
Printout
A protocol is generated after every test if a printer is connected. When a test is finished or stopped “Prn” appears in the display window “Monitor”. This means that a protocol will be printed.

Printout of HC6.2-EXT+
Options for LAB.line Testers

Ph21 Software

Ph21 Software
Ph21 – Data Acquisition and Analysis provides full data integrity: Compliant with FDA 21 CFR Part 11.

Range extension 50N

Range extension 50N
Measuring range extension 50N for higher accuracy measuring soft tablets.

Accessories

Mechanical Tablets

Mechanical tablets
Testing devices for daily function control of tablet hardness testers.
hardness

Calibration equipment

Calibration kit
Practical case with standard weights, gauge blocks and tools for tablet hardness tester calibration.